Vitrifrigo C115i CHR HP Fridge/Freezer

Will it fit my caravan?

• Compare your existing cabinet opening with the flush cut-out of approximately 542W × 771H × 562D mm, or the door-outside cut-out of approximately 542W × 717H × 520D mm.
• Pay particular attention to depth on this model — at about 560mm overall it is deeper than the C60i and C85i, so check what is behind the cabinet.
• Allow the manufacturer's ventilation and installation clearances around the cabinet so the compressor can shed heat — this matters more in Far North Queensland than anywhere else in the country.
• Check you have a suitable 12/24V DC supply, correctly sized and protected for the fridge, wired by an appropriately qualified person where any new circuit work is needed.
• The door is reversible, so plan which way you want it to swing and make sure it clears benches, walls and drawers when fully open.
• Measure carefully before you order. We can talk you through it, but the buyer is responsible for confirming the opening suits the stated dimensions.

Before you buy

• Measure the height, width and depth of your existing cabinet opening.
• Compare those figures with the flush and door-outside cut-out dimensions listed above.
• Confirm there is room for ventilation clearances behind and above the fridge.
• Confirm your 12/24V DC supply and cabling are suitable.
• Decide which way the door should open.

We cannot promise a fit sight unseen — please measure carefully. If you would like a second opinion, email us a photo of your existing fridge space and the measurements and we will tell you what we think.